Housing And Trims ; Standard Sloped Incandescent Housing; 6 In.; 120 VAC; Galvanized Steel

OVERVIEW

Features:

• 6" Standard slope housing (oval)
• Oblique angle housing design holds trims flush with

the ceiling

• Adjustable socket plate permits lamp to remain perpendicular to floor through entire pitch range
• Medium base porcelain socket with nickel-plated copper

screw shell

• Housing is vertically adjustable to accommodate up to a 1"

ceiling thickness

• Patented (US Patent D552,969) Real Nail® 3 bar hangers:

telescoping system with pre-installed removable nail for

easy repositioning of housing in joist construction

• Integral T-bar mounting feature for secure installation in suspended ceilings
• Breakaway bars for tight joist spacing
• Bar hangers may be repositioned 90°
• Curved foot facilitates alignment with joist bottom
• Quick-Loc slot and oversized set screw lock fixture in position
• Housing is fully assembled for ease of installation
• Pre-wired junction box with (5) 1/2" and (1) 3/4" knockouts with pryout slots, (4) non-metallic sheathed cable connectors, and ground wire
• Shadow-free, knife-edge trim design blends smoothly

into the ceiling

• Angle-cut baffles ensure grooves remain parallel to the

floor to provide proper optics

• UL Listed, cUL/CSA certified for through-branch wiring,

maximum (8) #12 AWG branch circuit conductors (4 in, 4 out)

• Thermally protected against improper use of lamps
• Lamp wattage ratings and apertures based on trim selection. Trim selection follows IC926 and TC926 Series